OVERVIEW
The REL-R-0.3 is 300 watts wireless PLC relay that enables remote control of lighting systems or used in conjunction with contactors for larger loads.
The module features a small and compact design that allows to be installed inside metal electrical boxes for lighting fixtures.
The REL-R-0.3 is designed to be used in conjunction with one or more transceivers (e.g., INT-KEY Keypad Controllers, INT-MIO sensor board, INT-MIO Luxmeter, etc.), or directly with the DimOnOff® Configuration, Control & Monitoring software. With these different modules, complex automation environments can be designed and operated.
As with all other modules of the DimOnOff® automation series, the configuration of this Load module is done wirelessly and remotely, using the DimOnOff® software.
Once the configuration completed, the REL-R-0.3 (and all other modules) will be fully autonomous, and will not necessitate the presence of a serveron the network, unless functionalities such as scheduling or data acquisition are required.
FEATURES
- Designed to create flexible, smart automation systems for residential, commercial and industrial use
- Remotely control the DimOnOff® modules locally, or remotely over the Internet (Specify MOD-ETH, PLC-Ethernet modem)
- Responds to On/Off or Bright/Dim/Setpoints commands, and many programmable Scenarios, Commands and Timers
- Designed to fit inside standard metal electrical junction boxes or behind a wall outlet
- Equipped with leads and mounting bracket for easy installation
- Reliable wireless PLC communication in high attenuation (0.5? min.) and noisy electrical environments
- Very robust narrowband FSK modulation including advanced processing functions
- 100% Electronic output
- UL Listed (E255917)
OVERVIEW
The REL-R-0.3 is 300 watts wireless PLC relay that enables remote control of lighting systems or used in conjunction with contactors for larger loads.
The module features a small and compact design that allows to be installed inside metal electrical boxes for lighting fixtures.
The REL-R-0.3 is designed to be used in conjunction with one or more transceivers (e.g., INT-KEY Keypad Controllers, INT-MIO sensor board, INT-MIO Luxmeter, etc.), or directly with the DimOnOff® Configuration, Control & Monitoring software. With these different modules, complex automation environments can be designed and operated.
As with all other modules of the DimOnOff® automation series, the configuration of this Load module is done wirelessly and remotely, using the DimOnOff® software.
Once the configuration completed, the REL-R-0.3 (and all other modules) will be fully autonomous, and will not necessitate the presence of a serveron the network, unless functionalities such as scheduling or data acquisition are required.
FEATURES
- Designed to create flexible, smart automation systems for residential, commercial and industrial use
- Remotely control the DimOnOff® modules locally, or remotely over the Internet (Specify MOD-ETH, PLC-Ethernet modem)
- Responds to On/Off or Bright/Dim/Setpoints commands, and many programmable Scenarios, Commands and Timers
- Designed to fit inside standard metal electrical junction boxes or behind a wall outlet
- Equipped with leads and mounting bracket for easy installation
- Reliable wireless PLC communication in high attenuation (0.5? min.) and noisy electrical environments
- Very robust narrowband FSK modulation including advanced processing functions
- 100% Electronic output
- UL Listed (E255917)
APPLICATIONS
- On/Off and Bright/Dim of incandescent lamps
- On/Off operation of fluorescent and low voltage magnetic lighting
- On/Off operation of fans, motors, mechanical relays for various large-load operations, and general inductive loads
SPECIFICATIONS
- Operating voltage: 120VAC, 60Hz
- PLC 262 kHz carrier frequency
- Load power rating:
- 300W Incandescent load (Wall or Pendant Fixture Application Only)
- 300W Ballast (electric discharge lamp)
- Ambient operating temperature: -40°C to +40°C
Dimensions
Length: 3.16po- 80.26mm
Width: 1.75po - 44.45mm
Height: 1.56po - 39.75mm
CAUTIONS AND NOTES
- The REL-R-0.3 must be installed inside fixtures or into an electrical box with proper size.
- Only used for junction boxes where min. 90°C wiring is used.
- Do not install ceiling surface mounted luminaries with incandescent lamp directly under the junction box where the module is installed. Only pendant or wall mounted luminaries may be used.
- These modules are intended for installation in accordance with your local electric code and regulations. It is recommended that a qualified electrician perform this installation.
- Dimming function is intended for use with incandescent lights only.
- A transmitter is required to communicate with the module and is sold separately.
WIRING
INSTALLATION INSTRUCTIONS
- Disconnect power at the circuit breaker before installation.
- Open the electrical junction box and identify the Line, Neutral and Ground wires. Identify the conductor that supplies power to the lamp that you want to control.
- Attach the REL-R-0.3 inside the metal electrical box using the module mounting bracket. Connect the supply Ground wire (G) together with the module mounting bracket and the grounding screw.
- Disconnect the Line wire that had supplied power to the lamp that you want to control.
- Connect the disconnected wire of the lamp to the Blue lead of the REL-R-0.3. Connect the supply Line wire (L) to the Black lead of the REL-R-0.3.
- Connect the white lead of the REL-R-0.3 together with the supply Neutral wire (N).
- Use screw wire connectors for all connections. Check that all connections are tight and there is no exposed bare conductor.
- Place wires and module into the electrical box.
- Close the box and restore power.
RELAYS
- REL-R-0.3 wireless PLC 300 Watts Relay
- REL-RT-5-MON Powerline 5 Amps Monitoring Relay
- REL-R-20 - MULTI-FUNCTION 20 AMP WIRELESS PLC RELAY
- REL-R-2.5 Load Module for Dimming Ballasts
- REL-RT-20 Powerline Relays 20 Amps
- REL-R-3x3 three outputs relay
- REL-XB-3X3 WIRELESS RF XB MESH 3 OUTPUTS RELAY
- REL-R-15 - Multi-function 15 amp wireless PLC Relay
- EO-PD - 300W Plug-in Dimmer / Relay
- EO-3WR - EnOcean Wireless 3-wire Relay Receiver
- Constant Voltage LED Dimmer
- REL-XB-10/20 Wireless RF mesh relay 10A (277-347) 20A (120-240)
- REL-XB-5-MON Wireless RF mesh relais with monitoring features
- EO-5WR - EnOcean Wireless 5-wire Relay Receiver
- ACC-CVLD Constant voltage LED dimmer
- ACC-CLK2 - Astronomical Clock
- EO-WSS10-GUZ - EnOcean RF Wall Switch Receivers Self-Powered
- INT-ADR-XB
2025 Lavoisier, suite 135, Québec City, Québec G1N 4L6, Canada