CAB-3PA-vvv Phase Coupler

OVERVIEW

 The CAB-3PA Phase couplers takes the PLC signal on one phase of the electrical system (typically split-phase or three-phase), and repeats it at full signal level on all three phases (acts as an active coupler and re-amplifier).

It also allows to create 3 distinct communication Backbones when used with inter-voltages and will act as a re-amplifier on one of the line of another voltage or simply on a communication wire without voltage (dedicated Powerline communication wire, for very long distances, perfectly clean data line, or to couple 2 secondary's of different transformers).

In addition, the CAB-3PA circuit board offers supplementary input-output pinout allowing to use the daughter board of the INT-MIO and execute the same functional options of the INT-MIO: installation of a radio-frequency (RF) interface board XBee or EnOcean, or use a I/O connector to plug modules with dry-contacts, instruments with 0-10VDC outputs or sensors (Occupancy - Lux) that will trigger Scenarios to modules installed on the Powerline.

voltage-phase-coupler-connection

FEATURES

  •  
    • Provides three-phase coupling with repeat function and full amplification
    • Can be used in split-single phase and three-phase power systems
    • LED indicators for Power, CPU, CFG and Tx/Rx
    • Supplied with standard 12" x 12" x 4" metal enclosures
    • Reliable PLC communication in high attenuation (0.5Ω min.) and noisy electrical environments

 

Infrastructure

Photo
Features
Application examples
Specifications
Options & dimensions
Notes & instructions